April 5
Session 1 - Chairman: Nils Olov Jonsson

Project management – experiences so far and future challenges

Present and future challenges for nuclear I&C systems seen from a US perspective
Joseph Naser, EPRI

Realization of modernization projects – The decision making process

Hans Reddersen, Colenco Power Engineering Ltd

Lessons learned from project MOD

Anders Helmersson, OKG AB

Experiences from recent I&C replacement/modernization projects

A Johansson, L Johansson, Ringhals AB

Experiences from the safety I&C project for the Tianwan plants

Torsten Tech, Framatome ANP

Experiences from the Paks NPP Process Computer Reconstruction

Csaba Major, Paks Nuclear Power Plant Ltd

Modernisation of the I&C at the Olkiluoto NPP

Juha Miikkulainen, TVO Teollisuuden Voima Oy

Involvement in Project O1-MOD and lessons learned

Jan Erik Farbrot, Institutt for Energiteknikk, OECD Halden Reactor Project

April 6
Session 2 - Chairman: Öivind Berg
Plant-level requirements – redundancy, separation, diversity, safety classification, etc.

Finnish Requirements for Modern Automation Systems in Nuclear Power Plants

Juhanni Hyvärinen, STUK, Radiation and Nuclear Safety Authority

European Utility Requirements on I&C

Olle Andersson, Forsmarks Kraftgrupp AB

Experiences and further development from a regulatory perspective

Bo Liwång, SKI – Swedish Nuclear Power Inspectorate

Cost effective modernisation of systems important to safety (CEMSIS)

Jan Tuszynski, Datavoice

A study on Quantification of Information Flow and Effectiveness of information Aids for Diagnosis Tasks in Nuclear Power Plants
Poong Hyun Seong, KAIST

Requirements on future modernisation projects

Anders Helmersson, OKG AB

Modernisation of I&C systems in the Loviisa NPP

U Lindén, Fortum Heat and Power, M Välisuo, Fortum Nuclear Services

Regulatory Oversight Process for FIN5

Petteri Tiippana, STUK, Radiation and Nuclear Safety Authority

April 6

Session 3 - Chairman: Timo Okkonen

Plant-level I&C concepts – experiences so far and future trends

IAEA I&C Activities

Janos Eiler, IAEA

Modernising of control room in OKG: Experiences and future projects

Thomas Gunnarsson, OKG AB

I&C in the near future and in a longer perspective

Anders Johanssson, L Johansson, Ringhals AB

Instrumentation and control concepts in Olkiluoto 3

Lars-Erik Häll, TVO Teollisuuden Voima Oy

Advanced products for efficient and safe operation

Øivind Berg, Institutt for Energiteknikk, OECD Halden Reactor Project

New principles for Human System Interface design

Jon Kvalem, Institutt for Energiteknikk, OECD Halden Reactor Project

Experience from Human Factors Integrated System V&V in the O1-MOD project

J E Farbrot, Institutt for Energiteknikk, OECD Halden Reactor Project

Virtual reality for control room design and V&V

J E Farbrot, Institutt for Energiteknikk, OECD Halden Reactor Project

Implementation of Advanced On-Line Monitoring for Equipment Condition Assessment
Ramesh Shankar, EPRI

April 7
Session 4 - Chairman: Anders Helmersson
Software qualification – automation systems and programmable equipment

Qualification of RPS at Oskarshamn 1

Karl-Erik Eriksson, OKG AB

Benchmark exercise on safety evaluation of computer based systems (BESECBS)

Urho Pulkkinen, VTT Industrial Systems

Software QA issues important to safety of digital I&C systems

Terje Sivertsen, Institutt for Energiteknikk, OECD Halden Reactor Project

Traceability and Communication of Requirements in Digital I&C Systems Development
Janne Valkonen, TACO team, VTT Industrial Systems

Risk assessment of computerised systems

Atoosa P-J Thunem, Institutt for Energiteknikk, OECD Halden Reactor Project

CORAS – A platform for Risk Analysis of Security Critical Systems

R Fredriksen, Institutt for Energiteknikk, OECD Halden Reactor Project

ARRAC, Automation & Reactor Safety, Requirements, Assessment & Concepts

Sixten Norrman, VTT Processes

NKS project Barriers, Control and Management

Morten Lind, DTU

NKS Secretariat

Box 49

DK - 4000 Roskilde

Phone +45 4677 4045

Fax +45 4677 4046

In Nordic